This card has 16 PNP outputs. In addition, the outputs are capable of connecting a module of 16 outputs, which, when connected, will support a total of 32 PNP outputs.

General specifications:

Outputs: 16 PNPs
Ability to connect an output expansion module
Power supply: 24V DC according to industry standards

Applications:

As a module in industrial projects, instrumentation, motion control, SCADA and ...

Accessories:

You can use one PCS-16ECO-NT1 expansion card with 16 PNP transistor outputs, which will have 32 PNP outputs.

Appearance:

Address and network speed setting:

Configuring the network port and module address in the network is according to the below table:

Set the address on the network

Network Baud rate setting table

Set the address on the network

Configuring the network port and module address in the network is according to the below table:

Set the address on the network

Configuring the network port and module address in the network is according to the below table:

Terminals:

The terminals of this package are as follows:

Wiring:

Digital inputs are of Sink/Source type and NPN or PNP sensors can be connected to this type of product group. Digital outputs are offered in three NPN and PNP models and relay outputs.

Dimensions:

All modules are mounted on standard miniature rails.

Network wiring sample:

The following schematic contains 48 digital inputs and 48 digital outputs using three package models.